!
!

L20 - GM900 Lead (Reqs RIB)
!

Product Details
Programming Lead for Motorola GM900 mobiles.  Plugs between Mic Socket on radio and either Original Motorola Rib Box or our MIB Two interface. It will not work with our MIB One.

L25 - GP340 Programming Lead (Reqs RIB)
!

Product Details
Programming Lead for Motorola GP320, GP340, GP360, GP380, GP620, GP640, GP660 GP680 Handportables.  Plugs between side accessory socket on radio and MIB interface.  Works also with Motorola RIB.

.

L26 - GP340 Programming Lead (Ribless)
!

Product Details
Ribless Programming Lead for Motorola GP320, GP340, GP360, GP380, GP620, GP640, GP660 GP680 Handportables.  Plugs between PC 9 Pin D Plug and side accessory on radio.  No RIB or MIB required..

L27 - GP344 Programming Lead (Ribless)
!

Product Details
"Ribless" programming lead for Motorola GP344/GP388. Plugs into accessory connector on radio and other end into 9 way PC serial port. No MIB Interface or RIB required.

L28 - Visar Programming Lead (Reqs Rib)
!

Product Details
Programming Lead for Motorola Visar Handportables.  Plugs between side accessory jack on radio and original Motorola RIB or our MIB Two.  (Not suitable for our MIB interface).

L29 - GP900 Jedi Programming Lead (Reqs Rib)
!
l29 small

Product Details
Programming Lead for Motorola Jedi Series Handportables. Will program a minimum of GP900, HT1100, MT2100 and HT6000E.  Plugs between side accessory jack on radio and original Motorola RIB or our MIB Two. (Not suitable for our MIB One interface).

L30 - GP900 Jedi Programming Lead (Ribless)
!

Product Details
Programming lead for Motorola Jedi series. Will program a minimum of GP900, HT1100, MT2100 and HT6000E. Has built-in interface within the 9 way D plug. No RIB or MIB box required. 

L31 - HT600E/P210/HT800 Programming Lead (Reqs Rib)
!

Product Details
The L31 goes between a RIB Box (or our MIB One or MIB Two interface) and the radio.  It will program a minimum of the following Motorola portable radios: HT600, HT600A, HT600E, HT800, MT1000, MTX800, MTX810, MTX820, MTX888, MTX900, P200, P210, P500.

L32 - GM300/GM340 Programming Lead (Ribless)
!

Product Details
This is a simple lead that goes between your PC 9 pin serial port and the mobiles microphone socket. No RIB, MIB or Interface required.  It will not do all of the GM Series radios but we have tested it on the following: GM300,  GM340, GM360, GM380, GM640, & GM660.

It will not work on the GM900 or CM140 Series.